Motul 106295 TEKMA ULTIMA+ 5W30 (20 Liter)

  • Sale

  • Regular price $208.72
Shipping calculated at checkout.

Lubricant specially designed for the last generation of trucks, buses, construction machinery, farm machinery, stationary engines, and boat engines running with low sulfur fuel (≤ 50 ppm). Low emissions turbo Diesel direct injection engines, Euro III, Euro IV, Euro V or Euro VI emission regulation compliant, fitted with EGR system (Exhaust Gas Re-circulation) and/or SCR (Selective Catalytic Reduction) system and with or without DPF (Diesel Particulate Filter), working in highly severe conditions of load and service, requiring an ACEA E6 engine oil, "Low SAPS" with reduced content of Sulfated Ash (≤ 1.0%), Phosphorus (≤ 0.08%) and Sulfur (≤ 0.3%). Can also be used as single lubricant in case of fleet composed of new & old generation engines.

Heavy Duty Diesel engines compliant with Euro IV, Euro V or Euro VI emission regulation are fitted with sensitive exhaust gas after treatment systems:
- Sulfur and Phosphorus inhibit catalytic converters operation and can damage catalytic components: inefficient exhaust gas treatment.
- Sulfated Ash clog diesel particulate filters: shorter DPF lifetime, excessive fuel consumption and engine power loss.

The ACEA E6 standard is dedicated for lubricants intended for use in truck engines fitted with DPF.

Reduced SAPS (Sulfated Ash, Phosphorous and Sulfur) content enhance DPF lifetime and avoid DPF clogging.

API CJ-4 performance ensures protection and longevity of engines fitted with EGR systems:
- Dispersant and anti-oxidation properties: protection against soot builds up and oil filter clogging.
- Superior Anti-Wear level: bore polishing protection.
- Superior detergent level: piston cleanliness and piston groove deposits control.
- Viscosity grade at cold temperature minimizes wear at cold temperature, easy start up.

Anti-corrosion, Anti-rust, Anti-foam.

Drain interval: refer to manufacturers’ recommendations and tune to your own use.
Can be mixed with synthetic or mineral oils


Viscosity grade SAE J 300 5W-30
Density at 20°C (68°F) ASTM D1298 0.855
Viscosity at 40°C (104°F) ASTM D445 72.1 mm²/s
Viscosity at 100°C (212°F) ASTM D445 12.1 mm²/s
Viscosity Index ASTM D2270 164.0
 Pour point ASTM D97 -39.0 °C / -38.0 °F
Flash point ASTM D92 220.0 °C / 428.0 °F
TBN ASTM D2896 12.8 mg KOH/g